HDPE Pipes and Coils Fittings

Introduction
APL APOLLO Pipes manufactures a wide range of Polyethylene pipes, High Density (HDPE) conforming to various standards viz., BIS, BS, DIN & ISO to name a few. HDPE is strongly resistant to stress cracking and has low creep-rupture properties. It comes with excellent insulation properties over a wide range of frequencies and is not chemically active. These pipes are one of the two largest thermoplastic pipelines available and by far the most versatile.
Polyethylene is a thermoplastic polymer consisting of long chains of ethylene or ethane. It is a wax-like thermoplastic with a density less than the density of water. The only two additives added to polyethylene are Carbon Black, within the range limit of 2-3%, to add reinforcement and increase polyethylene’s weathering properties and trace amounts of antioxidants. The Pipes & Fittings are offered in PE 63, PE 80 and PE 100 grades, compliance to IS-4984.
Technical Specifications
APL Apollo CPVC Plumbing Pipes are manufactured as per the standards given below:

WHY SHOULD YOU CHOOSE APL APOLLO
HDPE Pipes and Coils Fittings?

Light weight, strong, long lasting and maintenance-free

Flexible due to inherent elasticity and can be supplied jointless in long lengths of up to 100m, particularly the smaller diameter pipes

Tough due to high flexural and impact strength

Capable of withstanding high internal and external loads by balancing internal fluid pressure with external soil pressure

Chemically inert and resistant to chemicals and hostile corrosive soil

Strongly resistant to acids, as well as alkalis and can be laid in marshy and corrosive soils without any coating or cathode-based protection

Highly resistant to abrasion and suitable for transportation of slurry, boiler ash, ores, beach sands, etc.

HIGHLY EFFICIENT AS INSULATING MEDIA AND REQUIRES MINIMAL INSULATION WHILE CARRYING CHILLED WATER
For HDPE Pipes & Coils specification, Click Here