Features and Specifications

Convenient push-fit joints.
Saves manpower.
Jointing can be done during any time of the day under any weather conditions.
Faster installation, immediate pressure testing and commissioning possible.
Joints accommodate expansion and contraction.
Joints are resistant to soil movement due to earthquake effects.
The Elastomeric rings have properties matching to Pipe with long shelf life.
Available as per IS-4985, ISO-4422-2 and DIN-8062.
Available in sizes & pressure classes shown in the table in Green colour.

Application

Used for conveyance of water in drip / sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system.

Installation

While designing the pipeline system, the level and depth of the trench is calculated depending on factors such as the terrain and function of the pipeline.

Excavation and pipe-laying must take place simultaneously, as leaving trenches open for too long, makes them unsuitable for use. A fine layer of sand should be spread on the trench-bed, to avoid mechanical damage arising due to the pipe coming in direct contact with the solid bed. Likewise, it is also recommended to put a layer of fine sand on top of the pipe, before filling and carrying the soil to cover the trench. As pipe-laying advances, trenches must be back-filled immediately. The pipe-joints, however, should be left exposed till after the pipeline system has been tested. The minimum width of the trench must be equal to the pipe diameter, plus 300 mm. At the crown of the pipe, the trench-width must not exceed the pipe diameter plus 600 mm.

Product Specifications

Dimensions as per IS 4985